Introduction
The Kaabo Skywalker series encompasses a range of electric scooters designed for urban commuting and general use. Key models include the Skywalker 8H and Skywalker 10C, each offering a balance of performance, portability, and features. These scooters typically feature powerful motors, decent battery ranges, and robust build quality suitable for city riding. This user guide focuses on the Kaabo Skywalker 10C model that has a wider deck and larger wheels than its other Skywalker siblings. The number 10 in the 10C represents the wheel size, that is 10-inches.
Product Diagram
Folding & Unfolding
Before hitting the road, it’s important to know how to properly open and fold your Kaabo Skywalker 10C electric scooter. Follow these steps to ensure your ride starts and ends smoothly.
Always make sure the folding lock is fully secured before riding. An unlocked mechanism can cause serious accidents.
How to Fold the Kaabo Skywalker 10C
Release the seat latch and take it out from the seat pole. Next, release the base latch. Then, press the notch and fold the seat pole
Release the safety pin located near the folding hinge. Then, fold up the kickstand to keep it out of the way during the folding process. Now, step firmly on the folding latch until you hear a click. This means the scooter is securely folded.
Release the latch on the handlebar pole to unlock the height adjustment. Slide the handlebar pole downwards to its lowest position. Once it’s in place, lock the latch securely. Pull the circular lock on the left side to fold the handlebar inward. Repeat the same step on the right side to complete the fold.
How to Unfold the Kaabo Skywalker 10C
Unfold both handlebars until they’re secured in place. Then, step on the folding latch and lift the scooter upright until you hear it click into the unfolded position. Engage the safety pin, and drop the kickstand.Â
Lift the seat up, make sure the notch clicks in, and secure the latch underneath to lock it firmly. Insert the seat pole into the mount and lock the seat pole latch to hold it at your desired height.
Adjust the handlebar pole to a comfortable height and lock the latch to secure it. You’re now ready to ride.
Lighting & Alerts
The Kaabo Skywalker 10C electric scooter includes basic lighting and an alert system to help you ride safely and stay visible.
Headlight & Taillight – Use the 
Light Switch on the handlebar to turn the headlight on or off. Always switch it on when riding at night or in low-light conditions to see and be seen. The rear light automatically shines brighter when braking to warn people nearby.
Deck Light – The Skywalker 10C comes with deck lights too. Just use the separate switch on the front right side of the deck to turn them on or off as needed.
Horn – Press the 
Horn Button to sound the horn and alert pedestrians, vehicles, or other riders. Use it responsibly to avoid unnecessary disturbance.
Take The First Ride
How to Ride Your Kaabo Skywalker 10C Electric Scooter Safely
Before hitting the road, take time to get comfortable with your electric scooter in a safe, open area. Follow these steps to start your first ride with confidence.
Practice your first rides in a quiet spot until you feel confident controlling the throttle, brakes, and balance.
Choose A Safe Practice Area
Always practice in a flat, open space that’s free from obstacles, traffic, or slippery surfaces. This helps you learn to balance, steer, and control speed safely.
Starting Your Ride
Power On:
Press and hold the
Power Button until the display turns on.Kick to Start:
Place one foot firmly on the front of the deck. Push off with your other foot to get moving.
Tip: The Kaabo Skywalker 10C electric scooter uses Kick-and-Go mode by default — the throttle only works once the scooter is rolling.Use the Throttle:
Once you’re moving, gently pull the accelerator to increase speed. Lean your body slightly forward for balance as you gain speed.Both Feet On Deck:
Place both feet securely on the deck once you’re moving at a steady pace.
Braking Safely
To slow down, release the throttle and gently pull the brake lever.
Always brake gradually to avoid sudden stops that could wear out the tires or cause you to lose balance.
Remember: The rear light will glow brighter when braking to alert people behind you.
Parking
When you stop:
Power off your electric scooter by long pressing the
Power Button.Use the kickstand to keep it upright on flat ground.
Charging the Electric Scooter
Charge your electric scooter when the battery level is low. Do not let the battery drain completely; this helps maintain battery life and performance. The proper sequence of charging is as follows:
Plug the charger to the wall socket first and turn it on.
Check if the LED indicator on the charger has turned green. This indicates that the charger is in standby mode. If the LED is flashing or shows red color, do NOT use the charger as it might be faulty.
Finally, plug in the charger plug into the charging socket of the electric scooter. The LED will now turn red indicating charging sequence.
The LED will automatically turn green once the charging is completed.
